|
|
|
|
|
|
本公司主要长期从事各种激光产品的研究和开发，所产生的CO2激光管，首创国内同类产品使用寿命短的难题。采用特殊工艺，有效降低工作气体的分解速度，使用工作寿命大为增加。CO2激光管在使用过程中常常由于工作气体的变化，使其寿命缩短，特别是在诸如激光雕刻、切割时由于激光管的频繁开关而寿命锐减，这时就需要经常更换激光管，给使用者带来许多麻烦，大大增加了使用成本。
本公司产生的CO2激光管，膜式好(基膜达95%以上）、光斑小（3-5MM）、功率大（1200MM激光管功率在68W以上，1600MM激光管功率在85W以上）为国内最高. 输出电流低（起辉电压2-3MA），特别适合激光雕刻、激光切割、激光刻章、激光打孔等方面使用。 @
本公司主要生产二氧化碳激光管、二氧化碳激光切割机、激光雕刻机等。现已经与国内外同行业众多家公司建立合作关系。所生产的10W至200W的激光管已达同行业先进水平，所生产的二氧化碳激光机内的激光管寿命已超过六个月。
主营业务：CO2激光器、CO2激光管、二氧化碳激光管、二氧化碳激光器、激光电源、聚焦镜、反射镜、激光切割机、激光雕刻机、激光扫版机、激光镭射机等先进的激光产品。
The company has long been engaged in a variety of laser products, research and development, and the CO2 laser tube, the first short product life similar problems. The use of special techniques, working gas to reduce the decomposition rate, life expectancy has greatly increased the use of the work. CO2 laser tubes are often in the course of the work of the gas due to changes in their life span shortened, particularly in areas such as laser engraving, laser cutting due to the frequent switching and reduced life expectancy, at this time often need to replace the laser tube, to the use of bring many troubles, has greatly increased the cost.
The Company generated CO2 laser tube, a good film (base film for more than 95%), spot small (3-5MM), great power (1200MM laser more than 68W power, 1600MM laser power above 85W) for the highest . Output current low (from Hui voltage 2-3MA), particularly suitable for laser engraving, laser cutting, laser-engraved chapter, such as the use of laser drilling. @
Our main products are carbon dioxide laser, carbon dioxide laser cutting machine, laser engraving machines. At home and abroad are already many companies with the industry to establish relations of cooperation. Produced by 10W to 200W laser tube has reached the advanced level in the same industry, the production of carbon dioxide laser in the laser tube life has been more than six months.
Main business: CO2 laser, CO2 laser, carbon dioxide laser, carbon dioxide laser, laser power, focusing mirror, reflectors, laser cutting machine, laser engraving machine, laser scan version machine, laser machine laser laser and other advanced products. |
|
|
| 激光管, 激光器, laser, 激光切割機, 鐳射雕刻機, 鐳射切割機, Laser tube, Laser cutting machine, 鐳射製版機, Laser engraving machine, Plexiglass, 有機玻璃, 有機玻璃製品, 竹簡, 繡花貼布切割, CO2激光器, CO2激光管, 二氧化碳激光管, 二氧化碳激光器, 激光打標 |
|
|
| Company : |
Nantong Dongsheng Laser Devices Co., Ltd. |
| Email: |
Contact us |
| URL: |
********
********
|
| Phone: |
*********
|
| Fax : |
*********
|
| Country : |
China |
| Address : |
*********
|
|
|
|
|
|
